SCS S-3 - Operating Scenario 3: Two Person Intercom

To Next Page

To Previous Page

3:Two person intercom , rider A use cellphone +

Bluetooth GPS , rider B use Bluetooth speed detector .

Pairing Procedure:

Step 1:Switch A to search mode (details to 3.1.2) , B to pairing mode (details to 3.1.1) .

when both headset stop blue and red light flashes , they are paired .

at same time instantly switch intercom .

Step 2:Switch A to pairing mode (details to 3.1.1) , cellphone search this S-3 and pair it up .

Step 3:Keep A in pairing mode(details to 3.1.1) , use Bluetooth GPS to search A and pair it up .

Step 4:Set B to pairing mode(details to 3.1.1) , use Bluetooth speed detector to search B and pair up .

*When both headsets are switched off , and A or B want to reconnect , please press

A’s intercom button to reconnect and will be able to share all audio source again .

Rider A

Cellphone

Rider A S-3 Rider A S-3

Rider A GPS

Rider B Speedometer

4.3 Operating Scenario