SCS S-3 - Operating Scenario 2: Two Person Intercom

To Next Page

To Previous Page

2:Two person intercom , and pairing to

cellphone + Bluetooth GPS + radio

4.2 Operating Scenario

Pairing Procedure:

Step 1:Switch A to search mode (details to 3.1.2), B to pairing mode(details to 3.1.1) .

when both headset stop blue and red light flashes , they are paired .

Step 2:Switch A to pairing mode (details to 3.1.1 ) , cellphone search this A and pair it up .

Step 3:Keep A in pairing mode(details to 3.1.1 ) , use Bluetooth GPS to search A and pair it up .

Step 4:Use 2.5mm to 3.5mm AUX in cable to connect radio to S-3 ,

S-3 wire connecting function switch on , all audio inter-grade are completed .

*Switch on intercom , both A and B can hear audio from GPS , speed detector or radio .

if A gets an incoming call , device will cut off the intercom .when A’s call is finished ,

device will reconnect automatically .

Rider A

Cellphone

Rider A - S-3 Rider A - S-3

Rider A`s GPS

Radio