10
S-3 equipped with multiple intercom function , numbers of device which the headset can be
paired with is 8-10 riders , here shows the pairing procedure as follows
[ 4 x S-3 as example (A,B,C,D) ] :
Step 1:Switch both A and B unit on , A unit to searching mode (details to 3.1.2),
B unit to pairing mode(details to 3.1.1) , A and B paired up and indicator off (blue light).
*Now A and B paired up and switch intercom function automatically ,
to pair up with other devices , please press B’s intercom button to switch off intercom function .
Step 2:Switch B unit on , B unit to searching mode (details to 3.1.2),
C unit to pairing mode(details to 3.1.1) , B and C paired up and indicator off (blue light).
*Now A, B and C paired up , B and C switch intercom function automatically ,
to pair up with other devices , please press C’s intercom button to switch off intercom function .
Step 3:Switch D unit on , C unit to searching mode (details to 3.1.2),
D unit to pairing mode(details to 3.1.1) , C and D paired up and indicator off (blue light).
*Now A,B,C and D paired Up , press intercom button to switch on intercom function .
*If have more S-3 to pair up , please repeat the step as above instruction .
*Interruption
In multiple intercom mode , if there is an incoming call caused one unit away from the connection ,
after call , will reconnected automatically . If interruption is caused by distance or bad signal ,
please press intercom button to reconnect .
To Next Page
Loading...