SCS S-3 - Multiple Intercom Reconnect

To Next Page

To Previous Page

4.5 Multiple Intercom Reconnect Procedure

B C

S-3 will remember paired units , but after switch off and want to reconnect again ,

please follow the procedure:

Step 1:Switch off all 4 units and all Bluetooth device connected to the headset .

Step 2:Switch on C and D unit , press C unit intercom button to connect D unit .

Step 3:Switch on B unit , press B unit intercom button to connect C and D unit .

Step 4:Switch on A unit , press A unit intercom button to connect B , C and D unit .

after all 4 units reconnected , switch on original connected Bluetooth device .

Step4 Step3 Step2