SCUBAPRO-UWATEC Aladin 2G User Manual

11. Settings
67
SCUBAPRO ALADIN 2G
English
Setting the Surface Interval warning
With this alarm you can set a time for
recovery or start time for repetitive dive
when training against given tables.
1. Confirm that you wish to change the
settings of the Surface Interval warning
by pushing
. Time value starts to
flash.
2. Scroll time value with or .
3. Confirm the surface time with
.
On/off starts to flash.
4. Switch between on/off with .
5. Confirm the setting with .
Setting the Ascent Speed alarm
With this alarm you can set ascent speed
alarm.
1. Confirm that you wish to change the
settings of the Ascent Speed alarm
by pushing
. Time value starts to
flash.
2. Scroll ascent speed value with or
.
3. Confirm the maximum ascent speed
with
. On/off starts to flash.
4. Switch between on/off with
.
5. Confirm the setting with .
Setting the Water Density
With this setting you can get optimized
accuracy on depth reading when you know
the salinity of the water.
1. Confirm that you wish to change the
settings of the Water Density by pushing
. Density value starts to flash.
2. Scroll density value with or .
3. Confirm the setting with
.

SCUBAPRO-UWATEC Aladin 2G Specifications

General

Brand	SCUBAPRO-UWATEC
Model	Aladin 2G
Category	Diving Instrument
Language	English