EasyManuals Logo

SCUBAPRO-UWATEC Aladin 2G User Manual

SCUBAPRO-UWATEC Aladin 2G
Go to English
454 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #144 background imageLoading...
Page #144 background image
11. Settings
66
SCUBAPRO ALADIN 2G
11.4 Menu “set 3” (Apnea)
With menu “set 3” or SmartTrak you can
configure the following items:
Setting Range Default Page
Dual Depth
alarm
5-100m,
5-100m,
on/off
10m (35ft), off
20m (65ft), off
66
Incremental
depth alarm
5-100m,
dn(down)/ up/
bth(both)/off
5.0m (20ft), off 66
Dive time
interval
warning
15s-10min,
on/off
30s, off 66
Surface
interval
warning
15s-10min,
on/off
1 min, off 67
Ascent
speed alarm
0.1-5 m/s,
(1-15 ft/s)
on/off
1 m/s (3 ft/s),
off
67
Water
density
1.000-1.050
kg/l
(Fresh water
~1.000,
Ocean
~1.035)
1.025 kg/l 67
Starting from the time of the display push
or until “set 3” appears.
Confirm that you wish to enter into the
menu of “set 3” by pushing .
Once entered into the menu you can scroll
with
and through the menu.
Setting the Dual Depth alarm
With this alarm you can set two independent
depth alarms.
1. Confirm that you wish to change the
settings of the Dual Depth alarm by
pushing
. First depth value starts
to flash.
2. Scroll first depth with
or .
3. Confirm the first depth alarm with
.
Second depth alarm starts to flash.
4. Scroll second depth with
or
.
5. Confirm the second depth alarm with
. On/off starts to flash.
6. Switch between on/off with .
7. Confirm the setting with
.
Setting the incremental depth alarm
With this alarm you can set repetitive depth
alarms at given depth increments.
1. Confirm that you wish to change the
settings of the incremental depth alarm
by pushing
. Increment value
starts to flash.
2. Scroll value with or .
3. Confirm the increment with . Up/
Down/Both/Off starts to flash.
4. Switch between Up/Down/Both/Off with
.
5. Confirm the setting with
.
Setting the dive time interval warning
With this alarm you can set time alarm that
repeats on given intervals.
1. Confirm that you wish to change the
settings of the dive time interval warning
by pushing . Interval value starts to
flash.
2. Scroll time value with
or .
3. Confirm the interval time with . On/
off starts to flash.
4. Switch between on/off with .
5. Confirm the setting with .

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SCUBAPRO-UWATEC Aladin 2G and is the answer not in the manual?

SCUBAPRO-UWATEC Aladin 2G Specifications

General IconGeneral
BrandSCUBAPRO-UWATEC
ModelAladin 2G
CategoryDiving Instrument
LanguageEnglish

Related product manuals