SDAR 830A, 830B, 830D, 830C - Specifications; General Features; Electrical Specifications

1
LCD display
2
‘HOLD” push button
3
Rotary switch
4
“10A” jack
5
“COM”jack
6
“VΩmA” jack
7
“Backlight ”push button(SDT-830C)
4
．
Specification
4-1. General feature
● Manual ranging DMM , that full scale is 1999counts
● Display : 3 1/2 digit LCD display..
● DATA HOLD function
● Backlight function(only SDT-830C)
Press BACK LIGHT, lit backlight, automatic put out for about 5 seconds. To light
again, need to press it again (note: when the battery is insufficient, the brightness
of the backlight will not enough).
● Operating temperature & Humidity: 0—40℃ (32 —104℉) & < 75% RH
● Storage temperature & Humidity: -10—50℃ (14 —122 ℉) & <80%RH
● Low battery indication. “
”appears on the display
● Battery type: 9V Battery(6F22 or 1604A )
●Fuse type: F1 250mA/600v F2 10A/600v
● Dimension (L x W x H) : 142 x 75 x 42mm
● Weight
(including battery)
:Approx 200g
● Altitude: up to 2000m
●Pollution degree: 2
●Ingress protection degree: IP20
●Test leads type:CAT Ⅲ 600V 10A
● Safety Class: CAT III 600V
4-2. Electrical specification (at2
3±5℃; <75% RH)
2
4
5
6
1
3
7