Why is the red detection indicator on for my SDKELI KS06 AOPD?
If the red detection indicator is on for your SDKELI Safety Equipment, it could be due to contact adhesion for one relay. The suggested solution is to replace the two relays with the same specification ones.
How to troubleshoot if AOPD is not working and all indicators are off in SDKELI Safety Equipment?
If the AOPD (Area of Operation Protective Device) on your SDKELI Safety Equipment isn't working and all indicators are off, there are several potential causes: * **No supply voltage:** Ensure the correct power supply is connected. * **Controller fault:** Further diagnostics may be needed.
What to do if power indicator and unusual station indicator are on, but normal operation indicator is off in SDKELI Safety Equipment?
If the power indicator and unusual station indicator are on, but the normal operation indicator is off for your SDKELI Safety Equipment, it could be due to: * The green status indicator of the receiver being off. * Wiring or transmission cable fault. Check and repair the transmission cable, replacing it if broken.
What to do if the conversion indicator is normal, but press is not able to work with SDKELI KS06 AOPD?
If the conversion indicator is normal, but the press isn't working with your SDKELI Safety Equipment, it may be due to: 1. A cut or incorrect connection between the OSSD output signal cable terminals and the electric part of the machine: Check and repair the electric circuit of the machine connected with OSSD, and ensure the connection is correct. 2. An open circuit in the output signal cable: Repair or replace the output signal cable. 3. An electric fault of the machine: Check and repair the electric circuit of the machine.
What to do if turning the function switch to the non-protection side makes the press not able to work on SDKELI KS06 AOPD Safety Equipment?
If turning the function switch to the non-protection side prevents the press from working with your SDKELI Safety Equipment, possible causes include: * A break in the electric circuit of the machine connected with OSSD: Check and repair the electric circuit of the machine connected with OSSD, ensuring the connection is correct. * An open circuit in the output signal cable: Repair or replace the output signal cable. * Disconnection in the loop of electric stroke for the machine: Check and repair the electric circuit of the machine.
Why is press not able to work when the conversion of indicator is normal for SDKELI KS06 AOPD Safety Equipment?
If the conversion of indicator is normal, but the press is not able to work with your SDKELI Safety Equipment, it could be due to: * The fuse F1 fusing: Replace the power fuse with a new one of the same specification, 5×20/5A. * The circuit between OSSD breaks: Check and repair the circuit and wiring of OSSD. * The contact point of relay is ageing or broken: Replace the relay with the same specification one. * Electric fault of machine: Check and repair the circuit and wiring of OSSD; if the wiring is correct, check and repair the electric circuit of the machine.
Why is AOPD working intermittently and the conversion of indicator is abnormal in SDKELI KS06 AOPD?
If the AOPD (Area of Operation Protective Device) on your SDKELI Safety Equipment works intermittently and the indicator conversion is abnormal, it may be due to: * Low supply voltage or bad contact in the circuit: Couple in the correct power supply or correct the bad contact. * Bad beam focusing: Readjust the position of the emitter and receiver to ensure proper beam focusing.
What causes the AOPD to not work and all indicators to be off on SDKELI KS06 AOPD Safety Equipment?
If the AOPD does not work and all the indicators are off on your SDKELI Safety Equipment, this could be caused by: * No supply voltage: Couple in the correct power supply. * The power fuse blowing out: Replace the power fuse with a new one of the same specification, 5×20/1A. * Power cable fault or bad contact for socket connector: Check and repair the power cable and socket connector. * Power switch broken or bad contact for connector, or relevant circuits broken: Replace the key switch, or check and repair connector and relevant circuit. * The switch mode power is broken: Check the connection of circuit and socket connector, replace the switch mode power if the wiring is correct.
What to do if shading the light curtain doesn't stop the press on SDKELI KS06 AOPD Safety Equipment?
If, when you shade the light curtain, the press does not stop on your SDKELI Safety Equipment, the issue could stem from: * A short circuit in the electric circuit of the machine connected with OSSD: Check and repair the electric circuit of the machine connected with OSSD. * A short circuit in the output signal cable: Replace the cable and its connector. * A short circuit in the circuit of the cam switch for muting function: Check and repair the circuit of the cam switch for muting function. * A fault in the braking of the machine: Check the machine.
Overview of the protective system's constituent parts including controller, light curtain, and cables.
Describes the emitter and receiver functions of the light curtain system.
Details the controller's role in power supply, signal processing, and output control.
Lists specifications and diagrams for transmission cables connecting system components.
Explains the power cable connections for the AOPD and controller.
Provides a breakdown of the entire machine specification for AOPD and safety light curtains.
Lists detailed technical specifications for controllers and safety light curtains.
Presents a parameter table for KS06/KS06G safety light curtains by beam spacing.
Provides parameter tables for cascaded AOPD/KS06G safety light curtains.
Illustrates the physical dimensions of key components like controllers, emitters, and receivers.
Outlines essential requirements and warnings for the safe installation of the system.
Details how to establish the detection zone and proper installation techniques.
Explains how to calculate and ensure the safety distance for proper operation.
Specifies the required distance from reflective surfaces to avoid detection interference.
Advises on preventing interference between multiple safety light curtain systems.
Provides instructions for mounting the controllers and system components.
Details controller installation, focusing on preventing mutual interference.
Discusses emitter/receiver installation and alignment to prevent interference.
Covers the electrical wiring procedures for the system components.
Highlights critical safety warnings and considerations before performing wiring.
Provides specific wiring diagrams and instructions for the CPSII controller.
Offers wiring details and diagrams for the CQ2 controller.
Details the wiring for KS06G safety light curtains, including PNP and NPN outputs.
Explains the wiring for cascaded KS06G safety light curtains.
Lists checks to verify proper installation and safety function of the system.
Outlines crucial checks to perform on wiring before applying power.
Describes how to test the light curtain's operation when the machine is not running.
Details how to verify that hazardous parts stop correctly when the light curtain is activated.
Guides on troubleshooting and fine-tuning the system's performance after installation.
Specifies inspections required during initial setup and operator changes.
Outlines checks for the machine being protected by the light curtain.
Lists periodic maintenance checks and items to inspect after setting changes.
Lists common faults, their causes, and solutions for the AOPD and machine.
Provides a guide to diagnose and resolve issues related to the system controller.
Offers solutions for common problems encountered with the emitter and receiver units.
General| Detection Method | Infrared |
|---|---|
| Output Type | NPN/PNP |
| Protection Level | IP65 |
| Housing Material | Aluminum alloy |
| Power Supply | DC 12V - 24V |
| Operating Voltage | DC12~24V |
| Operating Temperature | -10°C to +55°C |
| Weight | Varies by model |
| Storage Temperature | -20°C to +70°C |
To Next Page
