46
Important! Wires which have caused interference problems in the past are Nology, Mallory and Taylor,
so we do not recommend these. If you have these wires and are having problems try a different brand of
wires. Ignition interference problems usually show up as strange characters in the programmer screen, rough
running, misfiring or an RPM ERR code in Gauge 1 mode.
Factory default programmed values
If you have running problems or have trouble programming the system, you may want to restore all the factory
values. You will have to scroll through all the ranges in the programmer and check or re-enter the factory values.
Factory values are shown in the following pages. Be sure to select the proper page. There is a page for each of
the three different MAP sensors, so you must know which MAP sensor you have.
Tech Help
For technical assistance contact your dealer or:
Racetech Inc.
#5, 304 Noorduyn Park (Springbank Airport)
Calgary, Alberta, Canada T3Z 3S8
Phone 403-671-4015
E-mail racetech1@telus.net Website: www.sdsefi.com
When calling for help you should know which system you have. We offer 2 different systems,
“D” is fuel only, “F” fuel & multi coil ignition.
Warranty and Use of Products
Since SDS cannot control the installation or use of its products, we accept no responsibility for damage, loss or
personal injury while using our products. By using SDS products the user understands and accepts this.
All SDS electronic components are guaranteed to be free from defects in workmanship and material for a period
of 3 years from the date of sale to original purchaser if installed according to this manual. SDS shall make the
sole determination with regards to all warranty claims.
Components are not covered if they have been altered in any way, physically damaged, subjected to moisture
or incorrectly connected.
Repairs
1. Please call or email Racetech before returning any SDS components for checking or repair.
2. Please ship parts to us via FEDEX or UPS AIR or regular US Post.
3. DO NOT ship parts to us via UPS ground. You’ll be responsible for brokerage fees otherwise.
4. Please write on the box and waybill “FOR WARRANTY REPAIR, MADE IN CANADA”.
5. Items shipped to us for warranty checks or testing which are working properly will be subject to a
$40.00US charge plus shipping.
Prior authorization is required before any warranty or returned item is accepted. Defective components will be
repaired or replaced as soon as possible at the discretion of Racetech.
Returns
No returns are accepted after 30 days and all returned goods are subject to a 15% restocking fee as well as a
charge for any damaged components, cut wires or missing items.
---------------------------------------------------------------------------------------------------------------------
Courier Shipping
Items for warranty or repair should be shipped to:
Racetech Inc.
#5, 304 Noorduyn Park (Springbank Airport)
Calgary, Alberta, Canada T3Z 3S8
Phone 403-671-4015
E-mail: racetech1@telus.net Website: www.sdsefi.com
Please call or email us before sending parts for checking or repair.
Please write on the box and waybill “FOR WARRANTY REPAIR, MADE IN CANADA”
---------------------------------------------------------------------------------------------------------------------
Mail Shipping
Items for warranty or repair should be shipped to:
Racetech Inc.
To Next Page
Loading...