Why is my Sea Breeze Air Conditioner indoor unit making noise?
The indoor unit of your Sea Breeze Air Conditioner may emit noise when defrosting starts or stops; this is due to the refrigerant flow reversing directions. Normal refrigerant flowing in the unit can also cause some noise.
What to do if my Sea Breeze Heat Pump does not run?
If your Sea Breeze Heat Pump isn't running, check if the power is off or if the circuit protection device has tripped. A professional should test if the voltage is too high or low. Also, verify if the Timer is on. Note that a 3-minute delay occurs before each compressor start.
How to fix a Sea Breeze Heat Pump remote control that is not working?
To fix a non-working Sea Breeze Heat Pump remote control, first reset the unit by disconnecting the main power for 30 seconds and then reapplying it. Ensure the remote is within receiving range and not obstructed. Try replacing the batteries. Check the remote control for damage.
What to do if my Sea Breeze Air Conditioner is leaking water into the room?
If your Sea Breeze Air Conditioner is leaking water into the room, it might be due to excessively high air humidity. Make sure all windows and doors are closed. If the problem persists after this, it is recommended to call a service technician.
General| Brand | Sea Breeze |
|---|---|
| Model | HIGH EFFICIENCY Series |
| Category | Air Conditioner |
| Language | English |
Information on safe operation of your new Multi Zone Mini Split for safety and the safety of others.
Visual representations of various functions and modes displayed on the wireless remote control.
Explanation of each button's function on the wireless remote control for operation.
Visual representations of various functions and modes displayed on the wall control unit.
Explanation of each button's function on the wall control unit for operation.
Instructions for accessing, cleaning, and reinstalling the air filter for optimal performance.
Guidance on how to wipe down the indoor unit for cleanliness and maintenance.
Checks and actions to perform before and after the cooling or heating seasons.
Diagrams and dimensions for the indoor unit, providing installation layout information.
Diagrams showing required clearances around the unit for proper airflow and installation.
Criteria for choosing the optimal placement of the indoor unit within a room.
Step-by-step procedure for mounting the indoor unit on a ceiling or wall.
Instructions for properly installing the drainpipe for condensate water removal.
Detailed steps for flaring the end of the pipe for refrigerant connections.
Procedure for connecting the refrigerant lines using torque wrenches and specific tightening values.
To Next Page
