What to do if my Sea Breeze Air Conditioner LCD window indicates 'E4'?
- JJennifer JacobsonAug 8, 2025
If the LCD window of your Sea Breeze Air Conditioner displays 'E4', it indicates that the water tank is full. You should drain the water tank.
What to do if my Sea Breeze Air Conditioner LCD window indicates 'E4'?
If the LCD window of your Sea Breeze Air Conditioner displays 'E4', it indicates that the water tank is full. You should drain the water tank.
What does it mean if the LCD window of my Sea Breeze Air Conditioner indicates 'E1'?
If the LCD window on your Sea Breeze Air Conditioner shows 'E1', it could be due to a power interruption or a defective unit. To resolve this, turn the unit off, disconnect it from the power source, wait 10 minutes, then reconnect and turn it on again. If the error code reappears, the unit needs to be serviced.
How to fix a Sea Breeze PAS12 when the indicator is on but the unit isn't running?
If the indicator light is on but your Sea Breeze Air Conditioner isn't running, the timer might be activated. Try resetting the timer or allow it to time out.
Why is my Sea Breeze PAS12 not working in cooling mode?
If your Sea Breeze Air Conditioner isn't working in cooling mode, it could be due to a couple of reasons: either the room temperature is below the temperature setting, or there is frost on the evaporator. In both cases, this is normal operation, and the unit is likely defrosting. It will start running again once defrosting is complete.
Why is my Sea Breeze Air Conditioner not working?
Your Sea Breeze Air Conditioner might not be working due to several reasons: it might not be correctly plugged in (ensure it is properly plugged in), the plug or socket could be defective (consider changing them), the fuse might be blown (replace the fuse), or the breaker might have tripped (reset the breaker; if the problem continues, contact a licensed technician).
Explains the thermodynamic cycle of the air conditioner for cooling and dehumidification.
Identifies external parts visible from the front of the unit.
Identifies external parts visible from the back of the unit.
Guidelines for unit placement and electrical connection safety.
Details the buttons and LCD display on the unit's control panel.
Explains the function of various buttons on the control panel.
Steps to operate the unit in cooling mode.
Steps to operate the unit in dehumidifying mode.
How to adjust the fan speed for different modes.
Steps to operate the unit in heating mode.
Methods for draining condensation water from the unit.
Explains the functions and buttons of the wireless remote control.
Details the primary functions and buttons of the remote.
Step-by-step guide to using the remote for cooling.
Step-by-step guide to using the remote for heating.
Step-by-step guide to using the remote for dehumidifying.
How to activate and use the sleep mode via remote.
How to activate and use the auto mode via remote.
How to set the timer for on/off operations using the remote.
Instructions for attaching the unit's casters.
Steps to connect the drain pipe for water drainage.
Guidelines for installing the air exhaust duct.
Instructions for installing the window kit for exhaust duct.
Procedure for cleaning the air filter to maintain performance.
How to clean the exterior surfaces of the air conditioner.
Important safety warnings regarding usage and environment.
Specific advice for operating the mobile air conditioner/heater.
| Brand | Sea Breeze |
|---|---|
| Model | PAS12 |
| Category | Air Conditioner |
| Language | English |











