16
PRE-SEASON PREPARATION CHART
NOTE: It is highly recommended that the dealer perform the annual safety in-
spection and factory campaigns in addition to the pre-season preparation all at
the same time.
➀ Before installing new spark plugs, it is suggested to burn the excess BOM-
BARDIER LUBE lubricant by starting the engine using the old spark plugs.
➁ Safety item covered in the annual safety inspection.
OPERATIONS To be performed by
Lubrication/corrosion protection OPERATOR
Battery condition/charging and reinstallation DEALER
Battery, starter connections and routing
➁
DEALER
Spark plug replacement
➀
OPERATOR
Jet pump oil inspection DEALER
Propulsion system inspection DEALER
Oil filter replacement DEALER
Fuel tank straps OPERATOR
Oil tank straps OPERATOR
Oil injection tank filling OPERATOR
Flame arrester inspection
➁
DEALER
Fuel line condition
➁
DEALER
Filler neck, fuel tank and fuel cap condition
➁
DEALER
Check valves, fasteners,
fuel system pressurization
➁
DEALER
Throttle
➁
cable inspection/adjustment DEALER
Oil injection pump adjustment and bleeding DEALER
Engine ignition timing DEALER
Fuel injection sensors verification DEALER
Steering system adjustment/inspection
➁
DEALER
Reverse cable adjustment DEALER
Inspection of bailer pick-ups DEALER
Inspection of cooling system hoses DEALER
Monitoring beeper DEALER
Digitally encoded security system DEALER
smo9803a.fm5 Page 16 Thursday, January 29, 1998 8:37 AM
To Next Page
Loading...
Need help?
General
