Sea-doo Spark Series User Manual

128
WWAATTEERRCCRRAAFFTT IIDDEENNTTIIFFIICCAATTIIOONN
The main components of the water-
craft (engine and hull) are identified by
different serial numbers. It may some-
times become necessary to locate
these numbers for warranty purposes
or to trace the watercraft in the event
of theft.
HHuullll IIddeennttiiffiiccaattiioonn NNuummbbeerr
The Hull Identification Number (HIN)
is engraved on the right hand side of
the hull at the rear of watercraft, above
the front of the sponson.
TTYYPPIICCAALL
1. Hull Identification Number (HIN)
It is composed of 12 digits:
YDV 12345 L 8 09
Model year
Year of production
Month of production
Serial number
(a letter may also be used as a
digit)
Manufacturer
EEnnggiinnee IIddeennttiiffiiccaattiioonn NNuummbbeerr
The Engine Identification Number
(EIN) is located under the exhaust
manifold, close to cylinder number
one.
TTYYPPIICCAALL
1. Engine Identification Number (EIN)
EEnnggiinnee MMaannuuffaaccttuurreerr
IIddeennttiiffiiccaattiioonn
1. Engine Manufacturer Identification
5019
ROTAX
STRASSE 1
A-4623. GUNSKIRCHEN. AT

Sea-doo Spark Series Specifications

General

Displacement	899 cc
Hull Material	Polytec
Model	Spark, Spark Trixx
Engine Type	Rotax 900 ACE
Horsepower	60 hp / 90 hp
Fuel Type	Gasoline
Fuel Capacity	7.9 US gal (30 L)
Seating Capacity	2 or 3
Length	120 inches (305 cm)
Width	46 in (117 cm)