Sea-doo Spark Series User Manual

60
1. Lever rest position
2. 25% stroke required to activate iBR
functions
At speeds below 7 km/h (5 MPH), pull-
ing the iBR lever in will engage
reverse.
NNOOTTEE::
If water current is 7 km/h (5 MPH) or
above, the reverse can not be en-
gaged as the speed threshold for the
reverse is exceeded.
At speeds above 7 km/h (5 MPH),
pulling the iBR lever in will engage the
brake.
When the iBR lever is released after
braking or reverse operation, neutral
is engaged.
WWAARRNNIINNGG
IIff tthhrroottttllee lleevveerr iiss ssttiillll ppuulllleedd iinn
wwhheenn rreelleeaassiinngg tthhee iiBBRR lleevveerr,, ffoorr--
wwaarrdd mmoovveemmeenntt wwiillll bbee iinniittiiaatteedd
aafftteerr aa sshhoorrtt ddeellaayy.. IIff ffoorrwwaarrdd aacc--
cceelleerraattiioonn iiss nnoott ddeessiirreedd,, rreelleeaassee
tthhee tthhrroottttllee lleevveerr..
NNOOTTEE::
The neutral position can be fine tuned
by trimming the iBR system.
Refer to
Operating Instructions for de-
tailed instructions.
MMooddee BBuuttttoonn
The MODE button is located directly
below the multifunction gauge.
TTYYPPIICCAALL
1. MODE button
RRoottaaxx 990000 AACCEE -- 6600
It is used to scroll through the multi-
function displays.
RRoottaaxx 990000 AACCEE -- 9900
It is used to activate or deactivate
SPORT mode and to scroll through
the multifunction displays.
Refer to
Multifunction Gauge (LCD)
for details.
VVaarriiaabbllee TTrriimm SSyysstteemm ((VVTTSS))
BBuuttttoonn ((TTrriixxxx MMooddeellss))
The VTS control button is located on
the LH handlebar.
VVTTSS CCOONNTTRROOLL BBUUTTTTOONN
1. Bow up
2. Bow down
The VTS control button is used to ad-
just the riding attitude of the
watercraft.
Refer to
Operating Instructions for de-
tailed instructions.
CONTROLS

Sea-doo Spark Series Specifications

General

Displacement	899 cc
Hull Material	Polytec
Model	Spark, Spark Trixx
Engine Type	Rotax 900 ACE
Horsepower	60 hp / 90 hp
Fuel Type	Gasoline
Fuel Capacity	7.9 US gal (30 L)
Seating Capacity	2 or 3
Length	120 inches (305 cm)
Width	46 in (117 cm)