Sea-doo Spark Series User Manual

74
connected to a 110V household elec-
trical outlet to be charged.
NNOOTTIICCEE
UUssee oonnllyy tthhee ssuupppplliieedd cchhaarrggiinngg
aaddaapptteerr ttoo cchhaarrggee tthhee aauuddiioo
ssyysstteemm..
BBaatttteerryy lleevveell:: To show the battery
level; hold both volume buttons
simultaneously.
When not in use, the unit will shut
down after 10 minutes.
TToo rreemmoovvee::
1. Push button
2. Lift handle
1. Push button
2. Lift handle
IInnssttaallllaattiioonn
Before installing the radio, make sure
the front and the sides of the latch on
the vehicle move freely and return to
their initial position.
AAUUDDIIOO SSYYSSTTEEMM LLAATTCCHH
1. Front of latch
2. Sides of latch
3. Locking tabs
To install the radio, start by inserting
the front locking tabs and then push
downward to engage the latch
completely.
Make sure the radio is properly in-
stalled and secure by pushing both
sides upward.
CCAAUUTTIIOONN
PPrroolloonnggeedd eexxppoossiittiioonn ttoo lloouudd mmuu--
ssiicc ccaann ddaammaaggee yyoouurr hheeaarriinngg..
TThheerreeffoorree,, wwee ssuuggggeesstt aa 1100 mmii--
nnuutteess bbrreeaakk ttiimmee eevveerryy 4455 mmii--
nnuutteess ooff lliisstteenniinngg..
EQUIPMENT

Sea-doo Spark Series Specifications

General

Displacement	899 cc
Hull Material	Polytec
Model	Spark, Spark Trixx
Engine Type	Rotax 900 ACE
Horsepower	60 hp / 90 hp
Fuel Type	Gasoline
Fuel Capacity	7.9 US gal (30 L)
Seating Capacity	2 or 3
Length	120 inches (305 cm)
Width	46 in (117 cm)