Sea-doo Spark Series User Manual

78
TTYYPPIICCAALL
3. Using the other hand, take hold of
the edge of the boarding platform,
then pull yourself up so that you
can knee onto the boarding step.
4. Reach forward with one hand and
take hold of the molded handles
on the sides of the back seat or the
rear handle, then stand on the
boarding step.
5. Holding on to the handle behind
the seat, step up onto the boarding
platform.
6. Take hold of the seat strap to help
maintain your balance and step
forward onto the footboards on ei-
ther side of the seat.
7. Sit astride the seat.
OOppeerraattoorr wwiitthh aa PPaasssseennggeerr
1. The operator climbs on the water-
craft in the same way as explained
previously.
In choppy water, while in the
water, the passenger may hold the
watercraft steady to help the oper-
ator climb aboard.
OPERATING INSTRUCTIONS

Sea-doo Spark Series Specifications

General

Displacement	899 cc
Hull Material	Polytec
Model	Spark, Spark Trixx
Engine Type	Rotax 900 ACE
Horsepower	60 hp / 90 hp
Fuel Type	Gasoline
Fuel Capacity	7.9 US gal (30 L)
Seating Capacity	2 or 3
Length	120 inches (305 cm)
Width	46 in (117 cm)