Inflate (the small)
chamber, chamber #2
until it is firm. Inflate-
chamber #3 while mon-
itoring progress with
the Inflation Monitor. In-
flate the floor until firm
like the other cham-
bers.
Inflatable Seats
The inflatable seats are
designed for function
and comfort. Attach the
valves and inflate as
described in the steps
above.
Comfort High Seat
Optimized for operating
a motor, place the high
inflatable seat in the aft
position. The D-rings
can be used to secure
the seat in place. Run a
line or strap under the-
floor and tie off. They
can also be used to
hang items on.
AB-254 Oar Set
Assemble the two
halves. The blade has
a button which locks
into a corresponding
hole in the handle.
The oars are conve-
niently stowed on the
sides of the boat in
clips.
To row your boat using
the AB-254 oar set, use
the blue carry handles
as oar locks. Although
the handle is a snug fit
for the shaft of the oar,
slide the drip ring on
the inside of the boat to
act as a stopper to
keep the shaft in the
oarlock.
Your Sea Eagle 9 is now assembled and ready to use.
Please feel free to call us at 1-800-748-8066 with any
questions you may have and don’t forget to check out our
instructional video at
SeaEagle.com/Instructions!
7
SeaEagle.com/Instructions
SeaEagle.com/Instructions
shown wi
th opti
onal
el
ectri
c trol
l
i
ng motor*
To Next Page
Loading...
