Need help?Do you have a question about the Sea&Sea YS-D3 DUO and is the answer not in the manual?
General| Color Temperature | 5800K |
|---|---|
| Depth Rating | 100 meters |
| TTL | Yes |
| Exposure Control | TTL, Manual |
| Pre-flash Control | Yes |
| Power Source | 4 x AA batteries (Ni-MH, Alkaline, or Lithium) |
| Target Light | Yes |
| Sync Modes | Optical, Fiber-optic |
| Beam Angle | 120° (with diffuser) |
| TTL Compensation | -2.0 to +2.0 EV |
Safety classifications for DANGER, WARNING, and CAUTION, outlining risks of severe injury or property damage.
Specific risks and precautions for battery handling, heat, short-circuiting, misuse, and water exposure.
Advice on handling shocks, recharging, and cleaning battery terminals.
Guide to using DS-TTL mode with optical converters or camera flashes for automatic dimming.
Instructions for shooting in RC mode with compatible camera systems.
How to perform manual shooting by adjusting the light level control dial.
Checks for when the READY/TTL lamp does not light or shows errors.
Troubleshooting lack of light when connected via sync or fiber-optic cables.
Addressing dark images in manual shooting or incorrect exposure in DS-TTL mode.
Understanding the yellow light and 0.5s buzzer for charging status or low battery.
Red light for failure, yellow flashing for temperature or input limitation.
To Next Page
