Sea&Sea YS-D3 User Manual

UNDERWATER STROBE
YS-D3 LIGHTNING
日本語
English
取扱説明書
Instruction Manual
03123

Sea&Sea YS-D3 Specifications

General

Battery	4x AA
Depth Rating	100m / 330ft
Beam Angle	100 degrees
Recycle Time	0.6 sec (with Ni-MH batteries)
Coverage	100° x 100° (with diffuser)

Summary

General Safety Precautions

Battery Safety Precautions

O-ring Handling Precautions

Identification of Strobe Parts

Ball Mount Strobe Adaptor and YS Mount Strobe Adaptor

Details on attaching the included Ball Mount and optional YS Mount Strobe Adaptors to the strobe unit.

Strobe Operation Guide

Mode Switch Functions

Light Level Control Dial

Target Light Switch Operation

READY/TTL Lamp Indicators

Preparation for Setting Up

O-ring Maintenance

Installing the Batteries

Step-by-step guide on how to open the battery compartment and insert batteries correctly.

Connecting the Strobe

Connecting with the Sync Cord

Instructions on how to connect the strobe to a housing using a sync cord.

Connecting with the Fiber-optic Cable

Instructions for connecting the strobe using a fiber-optic cable for triggering via camera's built-in flash.

Taking Photographs

Manual and TTL Photography with Sync Cord

Fiber-optic Cable Photography

DS-TTL II Mode Photography

Explains DS-TTL II system for compensated TTL flash output, effective with pre-flash cameras.

SLAVE-TTL Mode Photography

Describes SLAVE-TTL mode for cameras not supporting DS-TTL II, detecting and enabling strobe flash.

Using the Diffuser

Customize Mode

Starting Customize Mode

Setting Pre-Flash Cancel Mode

Maintenance and Storage

Troubleshooting Common Issues

Technical Specifications