Need help?Do you have a question about the Sea&Sea YS-03 SOLIS and is the answer not in the manual?
General| Depth Rating | 75m / 250ft |
|---|---|
| Beam Angle | 100° |
| Battery Type | 4 x AA |
| Type | Strobe |
| Guide Number | 20 (ISO 100/m) |
| Recycle Time | Not applicable |
| Number of Flashes | 330 flashes with Ni-MH batteries |
Defines DANGER, WARNING, and CAUTION levels for user awareness and product safety.
Details DANGER, WARNING, and CAUTION advice for battery handling, charging, and storage.
Visual overview of key accessories including Diffuser, Diffuser Strap, Fixing Bolt, and Silicone Grease.
Details labels for Reflector, Battery cap, Power switch, READY lamp, and cable sockets.
Explains the function of the power switch (OFF/TTL) and the meaning of the READY lamp indicator.
Describes the purpose and use of the fiber-optic cable socket for additional strobes.
Details on opening the cap, inserting batteries with correct polarity, and closing the compartment.
Steps for inserting the connector, securing the cable, and connecting to the housing socket.
Recommendations for camera's forced-flash mode, red-eye reduction, and AF-assist light.
Explanation of the strobe's slave TTL system for flash dimming functionality.
Step-by-step guide for fitting the diffuser using straps, notches, and tabs.
Procedures for rinsing in fresh water, drying, and protecting the strobe and O-rings.
Details on controls, guide number, beam angle, battery life, recycle time, and construction.
To Next Page
