EasyManua.ls Logo

Seac Sub PRO 2000 ADV - Before, During, and after the Dive

Seac Sub PRO 2000 ADV
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Drawing 21 Blocking the shoulder straps
Drawing 22 Blocking the straps positioned over the
main strap
Before, during, and after the dive
Once on the surface, begin your dive by
deflating the bag; you will have three
possibilities:
1) By holding the Air Control power inflator
and pushing the grey button on the upper
part of the panel you will activate the upper
pneumatic overpressure valve, facilitating
the discharge of air. (Drawing 23).
Drawing 23 Opening of the upper valve by pushing
on the grey button
2) Hold the handle of the upper quick dump
valve on the right and pull it, or even pull
on the black tube of the cable: air will exit
the valve rapidly (Drawing 24).
3) If ever you find yourself upside-down, by
holding the Air Control power inflator and
pushing the lower part of the panel you
will activate the upper pneumatic
overpressure valve, facilitating the
discharge of air. (Drawing 25).
ENGLISH
40

Table of Contents

Related product manuals