Seacraft Power Converter v1.0 | 3-3
USING The pOweR CONveRTeR
Power converter control screen
9. You may now select the desired power output in steps of 20 %, by pressing the upper or
lower piezo button on the scooter’s control display.
Note!
Your external device might require a certain minimum voltage to be activated,
so check, on which displayed power level your device will be switched on.
10. Press any of the triggers shortly, or wait 5s in order to return to the standard screen.
Note!
If you would like to change the power output during the dive, simply carry out
steps 7 to 9.
To Next Page
Loading...