3-4 | Seacraft Power Converter v1.0
USING The pOweR CONveRTeR
3.3. Troubleshooting
Should the external device powered by the scooter’s battery not work as expected, proceed as
follows to determine the problem:
1. Check, if the scooter is switched on and working normally.
2. Check, if the external device meets the technical specications to be powered by the
scooter.
3. Switch to the power converter control screen, and check if a power level has been set.
If yes, try to change the power level to the maximum setting.
4. Check the e/o connection to the external device.
5. Check, if the adapter cable is correctly plugged in and secured.
6. Check, if the external device needs to be switched on separately.
7. Check the cable connection(s) of the external device.
8. Check, if the external device works with a dierent power source (e. g. battery tank).
9. Connect a dierent external device to the scooter, and check if it works.
If non of the above steps is successful, please visit the Seacraft support website
www.support.seacraft.eu
Use the contact form, or create a service ticket, so we can help you to solve the problem.
To Previous Page
Loading...