SeaDoo Seascooter RS1 User Manual

11. MAKE SURE the seals and sealing surface are clean and Fully lubricated with the supplied grease EVERYTIME (you can also buy this at your local
hardware store) before replacing the Inner Nose Cone. (see Fig. 20 and 21)
12. Align the arrow marking and close the inner nose cone by pushing all the way down. (see Fig. 22)
13. MAKE SURE the seals and sealing surface are clean and lubricated before replacing the vent Plug and CLOSE THE VENT PLUG TIGHTLY.
MAKE SURE the plastic link of the vent plug is not jammed in between the vent plug and the o-ring when tighten the vent plug.
14. Close the outer nose cone and the three latches.
Seals
Sealing Surface
17 18 19 20 21
22
Silicone
Grease
Silicone
Grease
9

SeaDoo Seascooter RS1 Specifications

General

Brand	SeaDoo
Model	Seascooter RS1
Category	Diving Instrument
Language	English