Need help?Do you have a question about the Seagate Technology IronWolf ST6000VN001 and is the answer not in the manual?
General| Capacity | 6TB |
|---|---|
| Interface | SATA 6Gb/s |
| Form Factor | 3.5 inch |
| Cache | 256MB |
| MTBF | 1 million hours |
| Warranty | 3 years |
| Workload Rate Limit | 180TB/year |
| Acoustics (Idle) | 25 dBA |
| Dimensions | 146.99mm x 101.6mm x 26.11mm |
Explains SATA interface advantages and connection model.
Quick reference table of key technical specifications for the drive.
Details formatted storage capacity and sector information.
Describes default logical cylinder, head, and sector configuration.
Outlines recording density, track density, and transfer rates.
Specifies physical dimensions and weight for installation.
Lists typical power-on to ready and standby to ready times.
Details power usage, voltage tolerance, and management modes.
Covers temperature, humidity, shock, and vibration requirements.
Specifies acoustic sound power levels for idle and seek operations.
Details drive performance under radio frequency environments.
Explains how to check warranty status and related policies.
Lists applicable safety and regulatory certifications for the drive.
Discusses RoHS compliance and hazardous substance restrictions.
Advises on corrosive environments affecting drive reliability.
Essential safety guidelines to prevent ESD damage during handling.
Explains point-to-point connection and jumperless SATA configuration.
Details SATA cable, conductors, and connector pin definitions.
Provides instructions and precautions for physically mounting the drive.
Describes drive hot-plugging support per SATA Revision 3.2.
Summarizes SATA interface and power connector signals.
Lists standard ATA commands supported by the drive.
To Next Page
