To Next PageTo Next Page
Need help?Do you have a question about the Seagate Constellation ES.3 ST4000NM0033 and is the answer not in the manual?
Details the advantages and functionality of the Serial ATA interface for enhanced connectivity and performance.
Details drive capacity, sectors, heads, cylinders, and logical geometry.
Details power requirements, consumption, and management modes for the drives.
Specifies operating and non-operating limits for temperature, humidity, and altitude.
Provides essential guidelines for safe handling and installation to prevent ESD damage.
Explains drive locking mechanisms, password settings, and data access controls.
Describes data band organization and the cryptographic erase feature for secure data deletion.
Lists Serial ATA standard commands supported by the drive.
Provides quick reference tables for key drive specifications across different models.
Details drive capacity, sectors, heads, cylinders, and logical geometry.
Details power requirements, consumption, and management modes.
Covers recording method, density, and Serial ATA interface specifications.
Specifies operating and non-operating limits for temperature, humidity, and altitude.
Details shock and vibration limits for both operating and non-operating conditions.
Provides detailed breakdown of drive power consumption in various modes like spinup, seek, and idle.
Explains active, idle, standby, and sleep power management modes.
Details active, idle, standby, and sleep power management modes.
Explains programmable power management interface and supported power conditions.
Details drive acoustics (sound power levels) measured according to ISO document 7779.
Details operating and non-operating vibration and shock limits.
Details AFR, MTBF, nonrecoverable read errors, load/unload cycles, and maximum workload.
Covers safety, EMC, FCC, Korean RRL, and Australian C-Tick certifications.
Details compliance with EU and China Restriction of Hazardous Substances (RoHS) directives.
Discusses effects of corrosive environments on drive components and precautions.
Provides essential guidelines for safe handling and installation to prevent ESD damage.
Covers drive mounting, SATA cabling, and connector pin definitions.
Details mounting dimensions, weight, and conformance to SFF standards.
Explains FIPS Level 2 security requirements including tamper-evidence and role-based authentication.
Details AES-256 encryption, Admin SP, and Locking SP for data security and access control.
Explains drive locking, password management, and the concept of data bands.
Details cryptographic erase for secure data deletion and authenticated firmware download.
Details hot-plug capabilities and summarizes connector pin definitions for the SATA interface.
Lists Serial ATA standard commands supported by the drive.
Details the data transferred by the Identify Device command, including configuration and model information.
Defines acceptable values for the Features register to control drive features like write cache and transfer modes.
Lists the S.M.A.R.T. command codes used by the drive for failure prediction and monitoring.
General