To Next PageTo Next Page
Need help?Do you have a question about the Seagate Constellation ST4000NM0033 and is the answer not in the manual?
Explains the advantages and connection of the Serial ATA interface.
Provides a quick reference for drive specifications across different models.
Details the formatted capacity, guaranteed sectors, and LBA mode for drive models.
Specifies the default logical geometry parameters of the drives.
Describes the recording method and interface technology used by the drives.
Lists the power-on to ready and standby to ready times for different drive models.
Details power consumption, conducted noise, voltage tolerance, and power management modes.
Specifies operating and non-operating temperature and humidity ranges and gradients.
Lists altitude specifications and outlines shock parameters for operating and non-operating states.
Specifies vibration levels and describes drive acoustics measurements.
Details radio frequency environments and compliance standards for EMI.
States AFR and MTBF specifications and lists other reliability parameters like workload.
Lists safety and electromagnetic compatibility certifications (CE, FCC, etc.).
Explains compliance with RoHS directives and considerations for corrosive environments.
Provides information on Seagate's product warranty, including how to determine remaining warranty.
Provides instructions for configuring and mounting the drive, including handling precautions.
Introduces SEDs, their security services, and TCG compliance.
Explains AES-256 encryption, DEK, Admin SP, Locking SP, and password management.
Details drive locking, data bands, and the cryptographic erase feature for data security.
Covers power requirements and specific ATA commands for SED models.
Details the Serial ATA interface, its speeds, and hot-plug capabilities.
Summarizes the pin definitions for Serial ATA interface and power connectors.
Lists ATA commands, including Identify Device, Set Features, and S.M.A.R.T. commands.
General| Model | ST4000NM0033 |
|---|---|
| Capacity | 4TB |
| Form Factor | 3.5 inch |
| Interface | SATA 6Gb/s |
| RPM | 7200 RPM |
| Cache | 128MB |
| Average Latency | 4.16 ms |
| Operating Temperature | 5°C to 60°C |
| Non-Operating Temperature | -40°C to 70°C |
| MTBF | 1, 400, 000 hours |
| Non-Recoverable Errors | 1 per 10^15 bits read |
| Operating Shock | 70G |
| Non-Operating Shock | 300G |
| Dimensions | 147 x 101.6 x 26.1 mm |
