Need help?Do you have a question about the Seagate IRONWOLF ST12000VN0007 and is the answer not in the manual?
Explains the Serial ATA interface, its advantages over parallel ATA, and point-to-point connectivity.
Provides a quick reference for essential drive specifications like capacity, speed, power, and environmental limits.
Details the drive's DC power requirements and consumption across various operating modes.
Covers temperature, humidity, altitude, shock, and vibration specifications for operating and non-operating conditions.
Covers Annualized Failure Rate (AFR), Mean Time Between Failures (MTBF), load-unload cycles, and warranty.
Lists various agency and safety certifications applicable to the drive models.
Provides essential guidelines for handling the drive to prevent electrostatic discharge (ESD) damage.
Details the Serial ATA interface cable, connectors, and hot-pluggable features.
Provides instructions and precautions for physically mounting the drive, including screw types and clearance.
Explains the drive's compatibility with hot-plugging features as per Serial ATA Revision 3.2.
Summarizes the signal and power pin definitions for the Serial ATA interface connector.
Lists the Serial ATA standard commands supported by the drive, including S.M.A.R.T. commands.
Describes the Identify Device command and the data it transfers about the drive's configuration.
Details the S.M.A.R.T. commands for near-term failure prediction and drive health monitoring.
General| Model | ST12000VN0007 |
|---|---|
| Brand | Seagate |
| Series | IronWolf |
| Capacity | 12TB |
| Form Factor | 3.5 inch |
| Interface | SATA 6 Gb/s |
| RPM | 7200 RPM |
| Cache | 256MB |
| Workload Rate Limit | 180TB/year |
| MTBF | 1 million hours |
| Warranty | 3 years |
| Features | AgileArray |
To Next Page