Need help?Do you have a question about the Seagate Savvio 10K and is the answer not in the manual?
Details compliance with UL, CSA, VDE, TUV, and other industry standards.
Highlights key features like 2-Gbit Fibre Channel, dual port, firmware, and SCSI enclosure services.
Covers performance aspects like cache buffer, transfer rates, spindle speed, and command queuing.
Details reliability metrics such as MTBF, actuator, S.M.A.R.T., and warranty.
Provides technical specifications like capacity, heads, data rate, and density.
Details access times for various seek operations, including controller overhead.
Presents typical read/write access times and their components.
Describes prefetch and multi-segmented cache for performance enhancement.
Details the use of the drive's buffer space for caching data operations.
Guides on configuring cache modes for optimal desktop and server performance.
Quantifies seek, recovered, unrecovered, and interface error rates.
Details errors corrected by the drive without user intervention.
Specifies and counts unrecoverable data errors.
Defines seek errors and their error recovery procedures.
Describes interface errors like disparity, illegal code, and CRC errors.
Discusses factors influencing reliability, including cooling and environment.
States MTBF as 1,400,000 hours and influencing factors.
Details Self-Monitoring Analysis and Reporting Technology for predictive failure warnings.
Describes the temperature monitoring system and its warning thresholds.
Explains DST for fault detection and its test coverage options.
Lists conditions that constitute DST failure, such as persistent seek errors.
Provides guidance on implementing the Drive Self Test function.
Specifies required drive states before initiating diagnostic commands.
Details the procedure for invoking DST via the Send Diagnostic command.
Describes the two DST test coverage options: short and extended.
Details the voltage and current specifications for DC power input.
Provides typical power dissipation figures for idle and active operations.
Defines operating limits for temperature, humidity, and altitude.
Details error recovery schemes, time limits, and algorithms.
Lists specific Fibre Channel Arbitrated Loop (FC-AL) features.
Explains dual port capabilities and supported concurrent transfers.
Lists all SCSI commands that the Savvio drives support.
Describes the J1 Fibre Channel single connection attachment (FC-SCA) connector.
Provides a detailed pin-out and functional description of the FC-SCA connector.
To Next Page
General