© 2015 Seagate Technology LLC. All rights reserved.
Publication number: 100686584, Rev. P September 2015
Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Desktop HDD and SeaTools are either
trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trade-
marks are the property of their respective owners.
No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC.
Call 877-PUB-TEK1(877-782-8351) to request permission.
When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer’s operating system may use a different
standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage.
Actual quantities will vary based on various factors, including file size, file format, features and application software. Actual data rates may vary depending on operating environment and
other factors. The export or re-export of hardware or software containing encryption may be regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for more
information, visit www.bis.doc.
gov), and controlled for import and use outside of the U.S. Seagate reserves the right to change, without notice, product offerings or specifications.
Document Revision History
Revision Date Description of Change
Rev. A 08/19/2011 Initial release.
Rev. B 09/01/2011 Updated decibel specifications, start/stop times; Table 3; mounting drawing.
Rev. C 10/20/2011 Updated voltage tolerance specifications.
Rev. D 01/17/2012 Corrected Table 1 (Altitude, operating) specification and Table 5 (Idle2).
Rev. E 06/11/2012 Updated Index.
Rev. F 09/05/2012 Added 2.5A spin-up code option (Table 1 and Table 2); page 17.
Rev. G 10/01/2012
Updated Table 1 and Table 2 with rated workload information. Updated DC power requirements (Tables 1,
3 and 4).
Rev. H 03/21/2014
Revised Rated Workload statement (pages 5 & 7); LP height updated & new mechanical drawings (pages
4, 9 & 20-21); Revised max storage note (page 13)
Rev. J 05/08/2014
Updated product name (pages fc, 2, 19 & 22) and Add metric “mm” values to mechanical drawings. (pages
20-21).
Rev. K 08/28/2014 Add SED models and SED Section 4.0 (pages: fc, 2, 4, 7, 22-23 & 29)
Rev. L 01/26/2015
Applied new logo (pages: fc & bc), applied latest page numbering convention (pages: all), added AFR =
<1.0% & update Rated Workload text (pages: 9 & 11), added Case Temp note & changed “&” to “%” in
Storage note (page: 17), add Reliability Section 2.12 (page: 20), cleaned up text in Mechanical Drawings
(pages: 24-25) & revised SED section 4.0 (pages: 26-27).
Rev. M 03/10/2015 Change Max Case Temperature to 69
°C (page: 17)
Rev. N 08/18/2015
New cover design (page: fc)
Replaced mechanical drawings to correct side hole dimension (pages: 24-25)
Rev. P 09/01/2015 Revised Rated Workload statement (pages: 9, 11 & 20)
To Next Page
Loading...
