Seagate Desktop HDD Product Manual, Rev. P 6
www.seagate.com Introduction
1.0 Introduction
This manual describes the functional, mechanical and interface specifications for the following:
Seagate
®
Desktop HDD model drives:
These drives provide the following key features:
• 7200 RPM spindle speed.
• High instantaneous (burst) data-transfer rates (up to 600MB per second).
• TGMR recording technology provides the drives with increased areal density.
• State-of-the-art cache and on-the-fly error-correction algorithms.
• Native Command Queuing with command ordering to increase performance in demanding applications.
• Full-track multiple-sector transfer capability without local processor intervention.
• Seagate AcuTrac™ servo technology delivers dependable performance, even with hard drive track widths of only 75
nanometers.
• Seagate OptiCache™ technology boosts overall performance by as much as 45% over the previous generation.
• Seagate SmartAlign™ technology provides a simple, transparent migration to Advanced Format 4K sectors
• Quiet operation.
• Compliant with RoHS requirements in China and Europe.
• SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns.
• Support for S.M.A.R.T. drive monitoring and reporting.
• Supports latching SATA cables and connectors.
• Worldwide Name (WWN) capability uniquely identifies the drive.
Standard models Self-Encryption models
ST3000DM001 ST750DM003 ST3000DM002
ST2000DM001 ST500DM002 ST2000DM002
ST1500DM003 ST320DM000 ST1000DM004
ST1000DM003 ST250DM000
Note
Previous generations of Seagate Self-Encrypting Drive models were called Full Disk Encryption (FDE) models before a
differentiation between drive-based encryption and other forms of encryption was necessary.
To Next Page
Loading...
