MOMENTUS 5400.6 SATA PRODUCT MANUAL, REV. G 24
4.0 SERIAL ATA (SATA) INTERFACE
These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA programmed
input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6. The drive also supports the use of
the IORDY signal to provide reliable high-speed data transfers.
For detailed information about the Serial ATA interface, refer to the “Serial ATA: High Speed Serialized AT Attachment”
specification.
4.1 HOT-PLUG COMPATIBILITY
Momentus 5400.6 SATA drives incorporate connectors which enable you to hot plug these drives in accordance with the
Serial ATA: High Speed Serialized AT Attachment specification revision 2.0. This specification can be downloaded from http:/
/www.serialata.org. This device requires a COMRESET from the host after a hotplug event.
To Next Page
Loading...
