EasyManua.ls Logo

Seagate ST9500325AS - Page 34

Seagate ST9500325AS
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MOMENTUS 5400.6 SATA PRODUCT MANUAL, REV. G 30
92 Master password revision code FFFE
H
93 Hardware reset value
(see description following this table)
xxxx
H
94 Auto acoustic management setting xxxx
H
95–99 ATA-reserved 0000
H
100–
103
Total number of user-addressable LBA sectors available
(see Section 2.2 for related information)
These words are required for drives that support the 48-bit
addressing feature. Maximum value: 0000FFFFFFFFFFFFh.
ST9500325AS = 0FFFFFFFh
ST9500325ASG = 0FFFFFFFh
ST9320325AS = 0FFFFFFFh
ST9320325ASG = 0FFFFFFFh
ST9250315AS = 0FFFFFFFh
ST9250315ASG = 0FFFFFFFh
ST9160314AS = 0FFFFFFFh
ST9160314ASG = 0FFFFFFFh
ST9120315AS = 234,441,648
ST9120315ASG = 234,441,648
ST980313AS = 156,301,488
ST980313ASG = 156,301,488
104–
118
ATA-reserved 0000
H
119 Free Fall Protection support (bit 5) 1 = Free Fall Protection supported
0 = Free Fall Protection not supported
120 Free Fall Protection enable/disable (bit 5) 1 = Free Fall Protection feature is enabled
0 = Free Fall Protection feature is disabled
121–
127
ATA reserved 0000
H
128 Security status 0001
H
129–
159
Seagate-reserved xxxx
H
160–
254
ATA-reserved 0000
H
255 Integrity word xxA5
H
Note. See the bit descriptions below for words 63, 88, and 93 of the Identify Drive data:
Description (if bit is set to 1)
BIT WORD 63
0 Multiword DMA mode 0 is supported.
1 Multiword DMA mode 1 is supported.
2 Multiword DMA mode 2 is supported.
8 Multiword DMA mode 0 is currently active.
9 Multiword DMA mode 1 is currently active.
10 Multiword DMA mode 2 is currently active.
WORD DESCRIPTION VALUE

Related product manuals