Section 2: SYSTEM OPERATION
If it is necessary to shutoff power to the flywheel motor
and slow the flywheel for any reason, press Seakeeper
ON/OFF button; the button will turn RED and the
LOCK/UNLOCK button will turn RED indicating the
command has been accepted. It takes approximately 4+
hours for the speed to drop to zero rpm.
If it is necessary to stop Seakeeper motion for any
reason press the LOCK/UNLOCK button. The LOCK
symbol will turn RED indicating that the Seakeeper is
locked. Never attempt to work on the Seakeeper until
the flywheel has stopped spinning. In the event that the
brake system has automatically locked the Seakeeper
due to an alarm or failure, no attempt should be made to
bypass the alarm or automatic lock.
To Next Page
Loading...
