Need help?Do you have a question about the Seakeeper 9 and is the answer not in the manual?
General| AC Frequency | 50/60 Hz |
|---|---|
| Stabilization (Roll Reduction) | up to 95% |
| Warranty | 2 years |
| Angular Momentum | 9, 000 Nms |
| Compatible Boat Size | 15-20 m |
| AC Voltage | 200-230V |
| DC Voltage | 12V |
| Flywheel Speed | 9, 000 RPM |
| Weight | 1, 200 lbs (549 kg) |
| Stabilization Capacity | 9, 000 N-m-s |
Provides a general introduction to the Seakeeper 9 system and its components.
Details the physical components and construction of the Seakeeper unit.
Describes the operator interface and its function for controlling the Seakeeper.
Explains the function and components of the Drive Box, including heat management.
Details the ECM's role in monitoring sensors and regulating Seakeeper operation.
Covers the IMU's function in measuring vessel movement for stabilization.
Explains the hydraulic brake mechanism for controlling precession and locking the unit.
Describes the closed-loop cooling system for managing component temperatures.
Introduces the section detailing the operation of the Seakeeper 9 system.
Provides an overview of the Seakeeper's display interface and its primary functions.
Details the functions of buttons available on the Seakeeper's home screen interface.
Explains the functions of buttons within the Seakeeper's settings screen.
Describes the functions of buttons used within the Seakeeper's service screen.
Outlines the step-by-step process for starting up the Seakeeper system.
Explains how to activate and use the Seakeeper's stabilization feature.
Details the correct procedure for safely shutting down the Seakeeper.
Describes how to adjust speed settings for boat transit and operational modes.
Identifies the sources of power for the Seakeeper and potential failure modes.
Describes symptoms and recovery procedures for a 24 VDC power failure.
Outlines effects and recovery steps for a 230 VAC power failure to the unit.
Explains how voltage fluctuations can affect the Seakeeper's operation.
Details how the Seakeeper indicates malfunctions and general alarm handling.
Explains how to access and review past alarms and warnings for troubleshooting.
Introduces the maintenance requirements for the Seakeeper system.
Lists relevant service bulletins for detailed maintenance procedures.
Highlights critical safety precautions during maintenance activities.
Lists necessary parts and specialized tools for maintenance tasks.
Provides a comprehensive table of scheduled maintenance tasks and intervals.
Outlines the warranty terms and periods for Seakeeper products.
Details the limitations on Seakeeper's liability regarding product use and defects.
Defines Seakeeper's ownership of intellectual property and data related to the product.
Presents key technical specifications for Seakeeper 9 and 7HD models.
Describes the physical arrangement and installation considerations for the Seakeeper.
Specifies the requirements for the raw water cooling loop.
Details the electrical power input specifications for the Seakeeper.
Describes the operator interface and control methods for the Seakeeper.
Explains the factors influencing Seakeeper performance and roll reduction.
Details the sensors, alarms, and monitoring capabilities of the system.
Explains the automatic safety features, including brake locking.
To Next Page
