Seakeeper 9 - 2.5 Boat Transit and Speed Adjustment

OPERATION
MANUAL
Product:
Document #:
Rev:
Page:
SEAKEEPER 9 / 7HD
90223
6
11 of 12
Section 2: SYSTEM OPERATION
2.5 Boat Transit and Speed Adjustment
When cruising without Seakeeper stabilization, run the Seakeeper at 1000
rpm to maintain lubrication of the bearings. The Seakeeper will use less
than 300 watts of AC power while operating in this mode.
1) Press the SETTINGS button to move from the MAIN screen to the SETTINGS
screen
2) Press the SPEED ADJUST button to adjust the Seakeeper’s speed.
!