Seakeeper 9 - Page 22

OPERATION
MANUAL
Product:
Document #:
Rev:
Page:
SEAKEEPER 9 / 7HD
90223
6
12 of 12
Section 2: SYSTEM OPERATION
3) To scroll through the SPEED settings, press the UP button and DOWN button
to highlight another speed.
*Seakeeper 9 pictured above*
4) Press the SET button to select the highlighted Seakeeper speed. The selected
speed will turn yellow. 1000 RPM is used for boat transit without stabilization.
a. Seakeeper 9: Normal operational speed is 9000 RPM. Quiet mode operates at
7200 RPM, which allows stabilization at a reduced flywheel speed. When 24V
power is removed from the Seakeeper, the speed selection will revert to 9000
RPM.
b. Seakeeper 7HD: Normal operational speed is 7000 RPM. Quiet mode operates
at 5600 RPM, which allows stabilization at a reduced flywheel speed. When 24V
power is removed from the Seakeeper, the speed selection will revert to 7000
RPM.
5) To navigate back to the SETTINGS screen, the BACK button is depressed
6) Make sure AC power is available to the Seakeeper and use the Seakeeper
ON/OFF to turn the Seakeeper ON if it is not already on.
a. The ICON will change from red (SEAKEEPER OFF) to green (SEAKEEPER ON)