Seakeeper 9 - 2.3 Stabilization Operation

OPERATION
MANUAL
Product:
Document #:
Rev:
Page:
SEAKEEPER 9 / 7HD
90223
6
7 of 12
Section 2: SYSTEM OPERATION
6) When the Seakeeper reaches its maximum operating speed where maximum
stabilization is available, the PROGRESS BAR will disappear and the Seakeeper is
available for maximum stabilization.
2.3 Stabilization
For stabilization after Seakeeper is ON and at speed:
1) Press the LOCK/UNLOCK button. The button will turn GREEN indicating that the
Seakeeper is precessing and stabilizing the roll motion. The stabilization mode starts
gradually; it takes 5-10 seconds to reach full effectiveness.