Section 2: SYSTEM OPERATION
The Seakeeper should be stopped when stabilization is no
longer required. Once the vessel is secured in the slip and the
crew has shut down the generator and engines, the AC and DC
breakers that control the Seakeeper should be switched to the
OFF position. The Seakeeper will continue to spool down to
zero rpm. No cooling is required during this time. Note
Seakeeper will take 4+ hours to coast down to zero rpm from
full speed.
Note: The seawater pump may run for 5 minutes after the
Seakeeper is switched off and is coasting (with AC power applied).
To Next Page
Loading...
