Attitude Calibration
Attitude Calibration adjusts the sensors in the Seakeeper Ride system to match the detected
horizon, providing a target attitude used during Auto Mode operation. Once Seakeeper Ride is in
operation, the system will adjust the boat’s attitude to match the horizon as calibrated during this
step. It is critical that the boat is on an even keel with no excess bow or stern trim during this step.
Please follow prompts on the screen for important details to this calibration. This process takes
approximately 1 minute to complete.
ATTENTION! Because of the risk associated with these procedures
there is a pass code which must be used when accessing these
pages. The pass code is 339037.
To Next Page
Loading...
