Diagnostics
WARNING:Diagnostic’s functions do not observe vessel speed,
DO NOT attempt to perform Diagnostics when vessel is moving!!
Note:Vessel must be stopped when performing Diagnostics.
Diagnostics will test the mechanical travel, direction of motion, and communication of
theSeakeeperRide system prior to sea trialing. Please pay attention to which Controller side (port or
star) you are diagnosing, so the movement of the Controller matches the indicated movement on
the Ride App Screen
Note:Diagnostics will be completed twice to check that both Actuators are functioning correctly. If
your system has a keypad, the lights will not function during Diagnostics.
ATTENTION! Because of the risk associated with these
procedures there is a pass code which must be used when
accessing these pages. The pass code is 339037.
To Next Page
Loading...
