EasyManua.ls Logo

Sealed Air Fill-Air Rocket - User Manual

Sealed Air Fill-Air Rocket
68 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Rev. C
© Sealed Air Corporation (US) 2014
1
Fill-Air Rocket ™ Inatable Packaging System User’s Guide
!
READY
#1 BL6T
!
READY
#1 BL6T
Standard Tabletop
Version
Optional Stand with
Integrated Bin
Fill-Air
Rocket
™
Inflatable Packaging System
User’s Guide
Original Instructions

Table of Contents

Questions and Answers

  • R
    Richard LoveJul 28, 2025
    What to do if my Sealed Air Fill-Air Rocket has no power?
    • J
      Jeremiah FlemingJul 28, 2025
      If your Sealed Air Packaging equipment has no power and the control panel Power LED is off, here are a few things to check: * Ensure the main power switch is in the ON position. * Verify that the main power cord is properly plugged into a suitable outlet (refer to section 3.3 Electrical Power Requirements). * Confirm that the facility power supply is not interrupted (refer to section 3.3 Electrical Power Requirements). * If these steps don't resolve the issue, it may be due to electrical component failure.

Summary

Safety

General Safety Precautions

Crucial safety measures including operation, maintenance, and proper usage of the system.

Safety Devices

System Set-up

Installation and Setup Guide

Guides users through unpacking, accessory considerations, installation area, and electrical verification.

System Operation

Loading the Material Roll

Step-by-step instructions for loading the material roll onto the mandrel.

System Controls Overview

Control Panel Interface

Explains the functions of the control panel's LEDs, LCD display, and keys.

Producing Standard Air-Filled Bags

Guides users on how to start, adjust, and stop the production of air-filled bags.

Auto Replenish Mode Operation

Batch Mode Operation

Maintenance and Repair

Preventative Maintenance Schedule

Outlines the schedule and procedures for routine preventative maintenance of the system.

Edge Seal Replacement Procedure

Troubleshooting

No Power Issues

Addresses issues related to the system not powering on or the Power LED being off.

Displayed Fault Messages

Material Advancement Problems

Troubleshoots issues where the material fails to advance when the start button is pressed.

Bag Inflation Issues

Addresses situations where material advances but bags do not fill with air.

Bag Sealing Problems

Troubleshoots issues with incomplete or faulty seals on the air-filled bags.

Air Leakage in Bags

Inconsistent Air Fill

System Stops Producing Bags

Sealed Air Fill-Air Rocket Specifications

General IconGeneral
BrandSealed Air
ModelFill-Air Rocket
CategoryPackaging equipment
LanguageEnglish

Related product manuals