Page 1
INSTRUCTIONS FOR: CHAIN BLOCKS
MODEL No's: CB500.V3, CB1000.V3,
CB2000.V3, CB3000.V3, CB5000.V3.
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND
CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY
CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. CONTENTS
2. GENERAL
Section 2. General. ....................................1.
Section 2.1. Identification .................................1.
Section 2.2. Technical Data. ...............................1.
Section 3. Safety/Operational Instructions. ..................2.
Section 4. Maintenance/Examination/Inspection. .............2.
Section 5. Assembly and storage. .........................3.
Section 6. Owner’s & Operator’s Responsibilities .............3.
Section 7. Declaration of Conformity. ......................4.
Section 8. Parts List/Diagram ............................5.
Page No. Page No.
2.1. Identification
Supplier: Sealey Power Products,
Kempson Way,
Suffolk Business Park,
Bury St Edmunds,
Suffolk, IP32 7AR.
Model No's: CB500.V3, CB1000.V3, CB2000.V3,
CB3000.V3, CB5000.V3.
2.2. Technical Data (A,B and C refer to fig.1)
Model No: ..............CB500.V3 ...CB1000.V3 ...CB2000.V3... CB3000.V3 ...CB5000.V3
Safe Working Load: ...........500kg ......1000kg ......2000kg.......3000kg ...... 5000kg
Test Load:...................750kg ......1500kg ......3000kg.......4500kg ...... 7500kg
Standard Lift (C): ............ 2.5mtr .......2.5mtr ........ 3mtr.........3mtr .........3mtr
Load Chain Diameter: ......... 6mm ........6mm ........8mm.........8mm ....... 10mm
Pulling Effort: ...............23.5kgf ......31.5kgf ......36.7kgf......34.67kgf ..... 42.22kgf
Head Room: ............... 295mm ......317mm ......470mm ......530mm ..... 588mm
Overall Width (B):........... 127mm ......140mm ......187mm ......199mm ..... 186mm
Overall Depth (A): .......... 131mm ......158mm ......161mm ......161mm ..... 253mm
Hook Aperture: .............. 25mm .......23mm .......33mm .......35mm ...... 50mm
Maximum Hook Capacity Ø: ... 35mm .......40mm .......45mm .......50mm ...... 65mm
Weight: ......................10kg ........12kg ........19kg.........25kg ........ 43kg
a) Design Capability: Test Load 50% overload.
b) For applications see Section 3.
c) For information on parts and materials requiring specialised repair techniques see Section 4.
d) Ambient operating temperature is between -10°C and +50°C.
fig.1
Original Language Version
CB500.V3, CB1000.V3, CB2000.V3, CB3000.V3, CB5000.V3 Issue: 1 - 14/04/10
To Next Page
Need help?
General
