Sealey DC2412 - User Manual

INSTRUCTIONS FOR:
CONVERTER 24V TO 12V DC 15A
MODEL NO: DC2412
 WARNING! DO NOT use on any vehicles other than those with 24V DC systems.
 DO NOT connect to any AC power source.
 DO NOT exceed the rated load of 15A.
 DO NOT dismantle. The converter must be checked by qualified service personnel only .
 DO NOT obstruct the vents in the casing; allow cooling air to flow through the unit.
 DO NOT get converter wet or use in damp or wet locations or areas where there is condensation.
 DO NOT use for any purpose other than for which it is designed.
 DO NOT operate the converter if damaged.
 When not in use store inverter in a safe, dry, childproof location.
1. SAFETY
2. INTRODUCTION
3. SPECIFICATION
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
Refer to Instructions
Suitable for commercial vehicles with 24V DC battery supply. Converts down to 12V DC 15A vehicle accessory output. Features a low and high
voltage alarm for added protection. Additionally includes a 5V USB outlet. Supplied with 550mm accessory connection lead.
Model No:.......................................................DC2412
Input Voltage: .......................................................24V
Output Voltage: ......................................................12V
Output Amperage:.................................................... 15A
Dimensions (L x W x H): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 x 85 x 50m
Supply Connection: .................................Accessory Connector Plug
© Jack Sealey Limited
DC2412 Issue:1 - 07/11/14
Original Language Version

Summary

Safety Precautions

General Safety Warnings

Crucial warnings for safe operation, including avoiding water, unauthorized dismantling, and ensuring proper ventilation.

Introduction to Converter

Product Application

Suitable for commercial vehicles, converting 24V DC to 12V DC accessory output, featuring a 5V USB outlet.

Product Specifications

Key Technical Details

Details include model number, input/output voltage, output current, dimensions, and supply connection type.

Operation Guide

Connecting the Converter

Instructions on inserting the input plug into a 24V DC accessory socket and connecting appliances to output sockets.

Alarm Indicators and Actions

Explains alarm triggers for low input voltage or high output load and the corresponding corrective actions.

Post-Use Procedure

Guidance on allowing the unit to cool down before storage after use.

Sealey DC2412 Specifications

General

Brand	Sealey
Model	DC2412
Category	Media Converter
Language	English