Sealey GSS2323 - Page 18

GardenShed 2.3 x 2.3 x 2.4m
Step 6: Assemble the front door (continued)
Turn door over with bracing aligned with holes (make sure the ridges of the door are facing up) and fix the bracing with
the provided 3.0 x 10mm rivets through the front of the panel. Then turn door over and insert plastic stoppers at the ends
of braces as shown below.
WHITEP LASTI
C
STOPPER
WH
ITEP LASTIC STOPPER
FIXW ITH3 .0*10MMR IVET
FRONT
BACK RIDGES FACING DOWN
ROOF TOP EDGE
FIX WITH 3.0MM RIVETS
WHITE PLASTIC STOPPER
WHITE PLASTIC
STOPPER
GSS2323/G | Issue:2(SP) 13/04/17
Original Language Version
© Jack Sealey Limited
Step 6: Assemble the front door continued
Turn door over with bracing aligned with holes (make sure the ridges of the door are facing up) and x the bracing with 3.0 x 10mm rivets
(provided), through the front of the panel. Then turn door over and insert plastic stoppers at the ends of braces as shown below.