Sealey SC10.V2 - User Manual

PAGE 1
Instructions for:
FOLDING WORKSHOP CRANE
Model No:
SC10.V2
SC10.V2 - 1 - 011007
2. GENERAL
1. CONTENTS
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
Section 2. General. ....................................1.
Section 2.1 Identification .................................1.
Section 2.2. Technical Data. ...............................1.
Section 3. Safety/Operational Instructions. ..................2.
Section 4. Maintenance/Examination/Inspection. .............2.
Section 5. Assembly and storage..........................3.
Section 6. Owner’s & Operator’s Responsibilities.............3.
Section 7. Declaration of Conformity. ......................4.
Section 8. Parts List/Diagram ............................5.
Page No.
2.1 Identification
Supplier: Sealey Power Products,
Kempson Way,
Suffolk Business Park,
Bury St Edmunds,
Suffolk, IP32 7AR.
Model No: SC10.V2
Height of Frame:.................................147mm
Length of Frame: ...............................1518mm
Overall Height: .................................1550mm
Maximum Width of Frame:.........................962mm
Width Inside Frame: ..............................862mm
Distance between Centres of Rear Wheels: ...........685mm
Weight: ..........................................74kg
PUMP HANDLE ASSY.
RELEASE VALVE
fig.1
2.2 Technical Data
Rated Capacity
Safe Working Load (SWL) 10t (tested to 50% overload).
Working Load Limit (WLL) 10t (tested to 50% overload).
Lifting Cap. in Position 1: ..............1000kg
Lifting Cap. in Position 2: ..............750kg
Lifting Cap. in Position 3: ..............500kg
Lifting Cap. in Position 4: ..............250kg
Maximum Lift Ht. at Minimum Jib Extn: ...1855mm
Maximum Lift Ht. at Maximum Jib Extn:...1990mm
Length of Jib Position 1: ...............893mm
Length of Jib Position 2: ...............983mm
Length of Jib Position 3: ...............1073mm
Length of Jib Position 4: ...............1163mm
a) Design Capability: Test Load 50% overload.
b) For a description of in-service and out-of-service conditions see
section 3 Safety, Section 4 Maintenance and Section 6.
c) The crane is fitted with a bypass valve that will prevent the ram
from over extending.
d) For applications see Section 3 Safety.
e) For control system, see Fig.1 for release valve and pump handle
assy. Usage is explained in Section 3.2 Operation.
f) For ground condition requirements, see Section 3 Safety.
g) For information on parts and materials requiring specialised
repair techniques see Section 4 Maintenance.
JIB LENGTH 1163mm
JIB LENGTH 1073mm
1990mm 1945mm 1900mm
962mm
862mm
685mm
862mm
1855mm
JIB LENGTH 983mm
JIB LENGTH 893mm
1518mm
250kg Max.
500kg Max.
750kg Max.
1000kg Max.

Sealey SC10.V2 Specifications