INSTRUCTIONS FOR
TYRE CHANGER - AUTOMATIC
MODEL NO: TC10
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
TC10 | Issue 1 02/02/18
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Electrical
shock
hazard
Crushing
of hands
hazard
Wear eye
protection
Wear protective
gloves
Wear ear
protection
Wear safety
footwear
Wear protective
clothing
DO NOT stand
behind the
column
DO NOT put any
body part under
the tool head
When bead
breaking the
blade moves
very quickly to
the left. The
operator should
not stand
between the
blade and
the tyre
WARNING!
Electricity
When clamping
the rim, DO NOT
place hand or
any other part
of the body
between the
clamping jaw and
the wheel rim.
1. WARNING LABEL LOCATIONS
To Next Page
Need help?
General
