Figure 3.5
3) Press the ENTER/Exit button to save your selection and return
to previous menu.
Key Beep Set
This function allows you to turn on/off the build-in speaker for key
pressing.
The default setting is Beep On.
1) From System Setup screen, use the SCROLL button to select
Key Beep Set and press the ENTER/Exit button.
2) From Key Beep Set menu, use the SCROLL button to select
Beep ON or Beep OFF to turn on/off the beep.
Figure 3.6
3) Press the ENTER/Exit button to save your selection and return
to previous menu.
Unit of Measure 1/2
English
Metric
Key Beep Set 1/2
Beep ON
Beep OFF
To Next Page