Sealey VS912 - 4.12. Time Setting; 4.13. Image Capture and Storage; 4.14. Check Internal Storage; 5. Notes

g.6
4.12. Time Setting
4.12.1. Intheclockmenu,youcansetthetimeanddate.(g.7)
4.12.2. Press “menu2 key to select menu.
4.12.3. Press “Up” or “Down” key to scroll through menu, select clock menu by pressing select.
4.12.4. Press “left” or “right” key to select time parameter to be changed.
4.12.5. Change value by pressing “up” or “down” key.
4.12.6. After setting, press “menu” key to exit.
4.13. Image Capture and Storage
4.13.1. The camera can store up to 25,000 images on the micro SD card.
4.13.2. Press image capturing button screen will display “store photo yes or no” Press “menu” key to save photo, press “select” key to delete
captured image.
4.13.3. If “No SD” is displayed in lower left corner of screen this means SD card is missing.
4.13.4. If “Full” is displayed at the lower left corner of screen, it indicates that SD card is full.
4.14. Check Internal Storage
4.14.1. Press “menu” key to enter menu.
4.14.2. Select image storage by using “up” or “down” key.
4.14.3. Press “Select” Key.
4.14.4. Scroll up or down using the “up” or “down” keys to select required image.
4.14.5. Press “select” key to view the image.
4.14.6. Press “up” key and the screen will display “Delete photo yes no”
4.14.7. Press “menu” key to delete image or “select” key to keep image.
4.14.8. Press “menu” button to exit
5. NOTES
5.1.  Allobjectsradiateinfraredenergy.Theradiatedquantityofinfraredenergyisbasedontheactualtemperatureandradiationcoefcient
of the surface. The camera can sence the infrared energy on the objects surface and estimate the temperature based on the amount
 ofenergydetected.Manyobjects(eg.metal,wood,waterandskin)caneasilyradiateenergy,ithasahighradiationcoefcient 
(greater than 90%), so it is easy to get an accurate measured value. This method is not suitable to a glossy surface or coated metal as
 thereradiationcoefcientislessthan60%.Toaccuratelymeasurethelowradiationcoefcientmaterials.Calculatetheradiation 
 coefcientandadjustcameraaccordinglytomakereadingsmoreaccurate.
5.2. Emissivity
5.2.1. Press “menu” key select Emissivity by scrolling up or down and pressing “select” key.
5.2.2. The default value is 0.95 this can be altered by using the “up” and “down” keys.
Year Month Day
Hour Minute
g.7
VS912 | Issue 1 20/05/16
Original Language Version
© Jack Sealey Limited