EasyManua.ls Logo

Seamax SUP-20D User Manual

Seamax SUP-20D
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Seamax Portable12V SUP-20D Electric Air Pump for Inflatable SUP, Kite and Inflatable Boat www.seamaxmarine.com 1877-907-7766
Page 1
Seamax Intelligent 12V Digital Air Pump
User Manual for Model: SUP-20D Double Stage
Congratulations on your purchase of this SUP-20D Double Stage 12V Electric Air Pump. This intelligent DC electric pump has
built in dual stage inflators with digital control and a LCD screen to display the set pressure and real-time air pressure. This pump
can quickly reach and auto stop at user preset air pressure, you will never over inflate your paddle board chamber. This model also
has a deflation port to help user quickly deflate the air from the chamber, so the boat or SUP can be easier to fold for storage.
Thanks to the intelligent control system and its new design power unit, this air pump is great to use with your inflatable tent, boats
and SUP, easy to support up to 20PSI and with our 2 years guarantee. This model of electric air pump can be your all-in-one
solution, at the mean time it is light weight to carry and easy to use. Please take a few minutes to read this instruction and
become familiar with its operation.
Question and Answer IconNeed help?

Do you have a question about the Seamax SUP-20D and is the answer not in the manual?

Seamax SUP-20D Specifications

General IconGeneral
BrandSeamax
ModelSUP-20D
CategoryWater Pump
LanguageEnglish

Summary

Safety Note

Need to Know

Pump Check List

First Time Use

Inflation Operation

Deflation Operation

Troubleshooting

Air Valve Connection

Maintenance and Storage

Two (2) Years Limited Warranty

Specifications

Pump Support Rate

Specifies the operational air pressure range from 0.5 to 20 PSI.

Digital Sensor Accuracy

Details the precision of the pressure sensor, measured at 0.01 PSI.

Controller Method

Describes the control system as a pre-programmed digital controller board.

Max Pumping Speed

Lists the maximum airflow rates for stage 1 (350L/min) and stage 2 (70L/min).

Pump Stages

Explains Stage 1 as a turbo fan and Stage 2 as a cylinder compressor.

Dual Inflators Switch Point

Indicates the pressure threshold (0.6 PSI) for switching between inflation stages.

O Ring Thickness

Specifies available O-ring sizes: 0.3mm, 0.5mm, and 0.6mm.

Sand Filter

Notes the presence of built-in filters for the air intake.

Pump Working Voltage

Defines the operating voltage range for the pump as 11-14V DC.

Max Energy Consumption

States the maximum power draw as 10A and 120W at 12V.

DC Power Cord Length

Specifies the length of the DC power cord as 12ft (3.75m).

Air Hose

Details the air hose length as 4.4ft, including HR valve adaptors.

Product Net Weight

Indicates the net weight of the pump is 3.6 Lbs.

Related product manuals